item1c

> Bulk Products

RemixBaggedButton

> Bagged Products

• Mortars
• Screed
• Render
• Post Mix

• Concrete
• Cement
• Kiln Dried Sand

item4
item5
item6
item7
item8
item9
item10

t: 01329 231200

"Build on our expertise"

Suppliers of: Dry Silo Mortars Hydraulic Lime Mortars
RendersScreeds Kiln Dried Sand

item15

Mortars

Remix Dry Mortar produce a range of Cementitious and Hydraulic Lime mortar mixes that incorporate a blend of all necessary dried constituent materials to achieve the desired performance.

Masonry Mortars

Rendering Mortars

Designed for use in the laying of brickwork, blockwork and stonework and are available in a large range of colours to complement the masonry units and enhance the final appearance.

Designed for multi-coat application to the exterior face of buildings. The hardened render will provide a durable weather resistant finish that enhances the surface and appearance of the building.

Remix are also able to supply render mixes for internal application requirements.

Flooring Screeds

Remix Dry Mortar produce a range of traditional and cementitious screed mixes that are applied to achieve a flat level surface ready for the application of the desired floor finish.

Traditional Screeds

A blend of sand and cement that can be supplied in any designation with the inclusion of fibre reinforcement if required.

Kiln Dried Sand

Remix Kiln Dried Sand is suitable for use as a jointing or grouting sand for block paving projects, the laying and bedding in of paving slabs and as a dried building sand. The material is kiln dried, factory produced and its grading is controlled in accordance with the requirements of BS 7533 – 3:2005. Discharge is direct from the silo without the need for water or a powered mixer unit.

© Copyright Remix Dry Mortar Ltd

Remix Bulk Products

Mix Information

Remix can provide mixes based on both performance and proportion criteria in accordance with BS EN 998-2.

Performance mixes are available in classes M2.5 to M15.0 and mixes designed by Nominal Proportions are available in accordance with table 1.

Traditional Mortar Designation

Nominal Proportions by Volume

Mass of Original Dry Materials

Cement:
Lime:
Sand

Cement:
Sand

Cement %

Lime %

I

1: 1/4: 3

-

20.0 - 25.0

1.0 - 3.0

-

1:3

20.0 - 25.0

-

II

1: 1/2: 4 to 4 1/2

-

14.0 - 19.0

-

-

1:3 to 4

16.0 - 25.0

-

III

1:1:5 to 6

-

11.0 - 16.5

3.0 - 7.0

-

1:5 to 6

11.5 - 16.5

-

IV

1:2:8 to 9

-

7.5 - 10.0

4.0 - 8.5

-

1:7 to 8

8.5 - 12.5

-

Table 1: mix composition of mortar mixes specified by nominal proportions.

Webmaster: angel-fish.co.uk