• Mon - Fri : 8.00 - 17.00
  • Saturday & Sunday : Closed

Internal and External Render

Internal and External Render

Remix Internal and External Render is suitable for use as a traditional two-part rendering system for internal and external use in moderate exposure conditions.

Applications

Remix Internal and External Render is suitable for use as a traditional two-part rendering system for internal and external use in moderate exposure conditions.

Quality

The mix is a kiln dried, pre-blended, factory-produced 1:1:5 to 6 cement lime sand render incorporating a waterproofing agent.

Mixing Instructions

To overcome any potential segregation that has occurred in transit, thoroughly mix the maxi bag contents before use.

The contents of the bag can be mechanically mixed in a free fall mixer for 3-4 minutes or hand mixed by pouring the contents onto a clean, flat surface and slowly adding clean water in increments and mixing continuously, until the desired workability is achieved.

For optimum results, approximately 2.0 to 2.4 litres of clean water should be used per bag. Render should be used within 60 minutes of water addition.

Refrain from excessive water addition as this will weaken the mix, delay setting times, adversely affect durability and may also result in colour variance.

In the case of render applications to high absorbency masonry units and/or high ambient temperatures, rapid moisture loss should be prevented by pre-wetting the masonry or substrate.

There is no need to add further additives or admixtures to the material on site as all required plasticizers/workability aids are already incorporated into the mix.

Coverage

Each maxi bag of Remix Internal and External Render will provide sufficient material to cover approximately 0.8m2 at 16mm depth.

Any questions? Please contact us or call us on 01329 231200