Roof Tile Bedding Mortar

Applications

Remix Roof Tile Bedding Mortar is available is specifically designed for bedding clay and concrete roof tiles. It is available as both a natural-coloured material and in a wide range of colours.

For further information about the Remix range of coloured mortars available, please contact your local Area Sales Manager.

Product Data

The mix is a kiln dried, pre blended, factory-produced 1:3 cement:sand mortar, complying with the requirements of BS EN 998-2.

Mixing Instructions

To overcome any potential segregation that has occurred during transit, thoroughly mix the maxi bag contents before use.

The contents of the bag can be mechanically mixed in a free fall mixer for 3-4 minutes. Alternatively, it can be hand mixed by pouring the contents onto a clean flat surface, slowly adding clean water in increments and mixing continuously until the desired workability is achieved.

For optimum results, add approximately 2 litres of clean water per bag and mortar should be used within 60 minutes. Use when ambient temperatures are between 5°C and 35°C.

Refrain from adding excess water or overmixing as this will weaken the mix, delay setting times and adversely affect durability.

There is no need to add further additives or admixtures to the material on site as all required plasticisers/workability aids are already incorporated into the mix.

Yield

Each maxi bag of Remix Roof Tile Bedding Mortar will yield approximately 12 litres of wet mortar when mixed.

Any questions? Please contact us or call us on 01329 231200