Category Services

Once you have decided to place an order for a Remix dry silo mortar system, we will need to know the mix required, total tonnage and intended power supply. One individual silo is required for each different mix. Our mortar is designed for use with all types of masonry units, above and below damp proof course. Please contact

3 Phase Electrical Supply (Mains or Generator) 415 volt A 32amp 5 pin female socket (industrial), rated IP44, must be provided from a 32amp 3 phase motor, rated MCB type C or D. The electrical supply to the silo must be backed up by a 30mA RCD, which is exclusively for silo use. Fuse protection

Mains A ¾” water hose connected to a standard tap with a ¾” external thread must be provided within 5 metres of the silo. Water pressure must be a minimum of 2 bar working pressure. In the event that the working pressure is less than 2 bar, a pump will be required to increase the

Silo Delivery Once Remix have received confirmation that safe access, a silo base and appropriate power and water provisions have been made by the customer, a silo delivery date will be finalised. The silo will be delivered by a rigid or articulated truck, which will reverse up to the silo base to stand the silo on it.

Daily Silo Use Ensure power leads and water hoses are correctly and securely connected. Place tub under discharge chute. Press start button on control panel to run mixer before opening manual butterfly valve. Open butterfly valve to allow material into dry chamber, which will then be fed into the wet chamber where water addition takes

Ordering a Silo Refill All refill orders must be placed directly with the Remix order office. Please allow a minimum of 48-hours’ notice, when ordering a refill. Any special delivery requirements, e.g. restricted hours of access to schools; details of road closures and deliveries through pedestrianised areas, must be conveyed at the time of the order being

Removal of the Silo from Site To enable the silo to be removed from site quickly and to prevent any unwanted delays with the silo remaining on site longer than required, it is imperative that the silo legs and the silo base are kept clean and free from obstruction. All accidental mortar spillages around the